SFA Saniseat+ Notice De Service / Montage page 15

Button Function
Seat
temperature
Night lighting
Child mode
5.3 TOILET SEAT LED
Toilet seat LED
POWER WATER SEAT SITTING SAVE POWER
POWER WATER SEAT SITTING SAVE POWER
POWER WATER SEAT SITTING SAVE POWER
Note: the information provided by the LEDs is cumulative.
5.4 USING THE WASHING SEAT FUNCTIONS
5.4.1 Using the washing function (anal or vulval)
Prerequisites: the sensor is activated.
• Press the Wash button: water flows to clean the nozzle, the shower rod comes out and washing begins.
• Second press on the wash button: oscillation begins.
• To stop washing: press the STOP button.
5.4.2 Use the drying function
Prerequisites: the sensor is activated.
• Press the Dry button: the air outlet hatch opens and drying begins.
• To stop drying: press the Stop button.
6. CLEANING/MAINTENANCE
DANGER
 Disconnect the device from the power before any intervention.
NOTICE
 Do not use aggressive chemical agents (such as acetone, pure bleach, etc.) which could degrade the material of the washing
toilet seat.
6.1 PRODUCT CARE
6.1.1 Cleaning the shower rod
NOTICE
 Do not pull, bend or push the shower rod.
Remote control LED
Can be used regardless of sensor status.
The seat temperature can be adjusted to 4 levels: seat temperature at room
1
temperature (1- the seat is not heated), 33°C (2), 36°C (3), 39°C (4).
Each press changes the temperature setting to the next level.
2
If level 2, 3 or 4 is selected, when the appliance is activated (by pressing a
3
button on the remote control or by activating a sensor), the SEAT LED on the
toilet seat lights up.
4
Note: to prevent any risk of burns, the seat temperature is automatically low-
ered to 35°C after 10 minutes seated.
OFF
Press the button to switch on the light that illuminates the bowl.
ON
Function activated when the sensor is triggered.
One press starts the wash function with settings specially adapted for chil-
dren: advanced shower rod position, low water flow (level 1) and half-heat
water temperature (level 2).
The levels are not adjustable.
Note: this function does not affect the seat temperature or the drying func-
tion.
Meaning
Device off
Device on
Device on in energy-saving
mode
Explanation
Toilet seat LED
POWER WATER SEAT SITTING SAVE POWER
POWER WATER SEAT SITTING SAVE POWER
POWER WATER SEAT SITTING SAVE POWER
15
EN
Meaning
The presence sensor
activated.
The toilet seat temperature
has been preset (level 2, 3 or
4). Lights up when the device
is activated.
steady: the water temperature
has been preset (level 2, 3 or
4). Lights up when the device
is activated.
flashing: water outlet problem.
is