SAKAWA BS7001 Manuel De L'utilisateur page 139

COLD START
C. Move the air lever to the CLOSE position.
D. Move the throttle lever to the high position.
E. Pull the starter grip, until the engine starts and gradually moves the air lever to the OPEN
position (normal working position). Set the throttle lever to the low position and let the engine
warm up for 1 minute before starting work.
HOT START
Follow cold start steps A and B. Move the throttle lever to the middle position and pull the starting
grip until it starts.
ENGINE SHUTDOWN
Set the throttle lever to the low position and the engine switch to the OFF position. If the
bioshredder is to be stored, set the petrol step lever to the OFF position.
A. Set the motor switch to the ON position.
B. Move the gas pitch lever to the ON position.
1.Normal working position
7. Throttle lever
139