SAKAWA BS7001 Manuel De L'utilisateur page 128

Before using this machine familiarize yourself with it ensuring that you know perfectly where all
the controls, safety devices and how to use it are.
If you are an inexperienced user we recommend that you execute a minimum practice doing
simple jobs and, if possible, in the company of an experienced person.
The cutting device of this machine is sharpened. Using this machine inappropriately is dangerous.
ATTENTION! Only lend this machine to people who are familiar with this type of machine and
know how to use it. Always lend the instruction manual with the machine so that the user reads it
carefully and understands it. This machine is dangerous in the hands of untrained users.
•The machine must be placed horizontally on a stable, level surface
•Check tyre pressure regularly: minimum 1.5 bar and maximum 1.9 bar.
Point to an area of 24 meters radius with center on the machine. During crushing, users must
ensure that no one is injured by the crushed material that is propelled from the machine. Use
white and red beacons to mark the danger area.
Make sure there are no people or animals within a perimeter of 24 meters.
Set the switch to the "Off" position whenever:
- The machine is left unattended.
- Maintenance work is carried out.
-The inlet and outlet tubes are removed.
Perform regular maintenance inspections regularly.
2.2. PERSONAL SAFETY
Be alert, watch what you are doing, and use common sense when operating this machine.
Do not use this machine when you are tired or under the influence of drugs, alcohol, or
medications. A moment of distraction while operating this machine can cause serious personal
injury.
Remove all keys or hand tools from the machine and the work area before starting the machine.
A wrench or tool left near the machine can be touched by a moving part of the machine and
projected causing personal injury
Don't overdo it. Keep your feet firmly on the floor and keep your balance at all times
Always wear safety equipment. Always wear gloves and safety glasses and hearing protection.
When in use, the machine produces more than 90 dB A, so hearing protection is mandatory. In
case the ears are not protected, there is a risk of damage to the ears.
Do not wear loose clothing, loose clothing, or ties.
2.3. SAFETY OF THE WORK AREA
Do not operate this machine in explosive atmospheres, as well as in the presence of flammable
liquids, gases and dust.
Use the machine outdoors only
Do not start the machine in an enclosed room or enclosure. Exhaust fumes, fuel vapors, and oil
contain carbon monoxide and hazardous chemicals. In the event of a gas concentration caused
by insufficient ventilation, remove from the work area anything that impedes the flow of clean air
128