Publicité
Les langues disponibles
Les langues disponibles
Error message
When you turn on the fixture, it will make a reset at first. The
display may show "Err channel is XX" while there are problems
with one or more channels. "XX" stands for channel 1, 2, 3, 4,
5, 6 who has the testing sensor for positioning. For example,
when the display shows "Err channel is Pan movement", it
means there is some error in channel 1. If there are some errors
on channel 1, channel 3, channel 23 at the same time, you
may see the error message "Err channel is Pan movement", "Err
channel is Tilt movement", "Err channel is Zoom" flash repeated
for 2 times, and then the fixture will generate a second reset.
If the fixture remain error message after performing reset more
than 2 times, only the channels which have errors can not work
properly, others can work as usual. Please contact with dealer or
manufacturer for service, self repair is not allowed.
PAN - movement Er
(PAN-head movement error) This message will appear after
the reset of the fixture if the head's magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-
motor is defective (or its driving IC on the main PCB). The TILT-
movement is not located in the default position after the reset.
TILT- movement Er
(TILT-head movement error) This message will appear after
the reset of the fixture if the head's magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-
motor is defective (or its driving IC on the main PCB). The TILT-
movement is not located in the default position after the reset.
Cleaning and maintenance
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device
have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, color
lenses, fixations and installation spots (ceiling, suspension,
trussing).
Mechanically moved parts must not show any traces of
wearing and must not rotate with
unbalances.
The electric power supply cables must not show any
damage, material fatigue or sediments.
Further instructions depending on the installation spot and
usage have to be adhered by a skilled installer and any
safety problems have to be removed.
CAUTION !
Disconnect from mains before
starting maintenance operation
We recommend a frequent cleaning of the device. Please use a
moist, lint- free cloth. Never use alcohol or solvents.
There are no serviceable parts inside the device. Please refer to
All manuals and user guides at all-guides.com
the instructions under "Installation instructions".
Should you need any spare parts, please order genuine parts
from your local dealer.
Technical specifications
Optics
4:1 zoom optics system
75% optic efficiency
Beam aperture: from 8° to 32°
Motorised linear zoom
Source
12 Multi-chip High-Power LEDs sources
Light output: up to 3.750 lumen
Rated Sources life: 25.000 hours
Flicker free sources Management, convenient for TV applications
and all video recorded events
Movement
Extremely accurate positioning
Moving-head operated via either
or 8/16 bit resolution
High-resolution stepper motors operated via microprocessors
ensure extreme accuracy and smooth movements
PAN and TILT automatic repositioning
Moving head range: 540° (PAN), 270° (TILT)
Colours
Sophisticated 4 colours RGB+W mixed, reaching high Colour
Rendering Index
Uniform light beam with no colour shadows, and rich saturated
colour-hues
8 or 16 bit resolution
4,29 billion colours (8 bit resolution)
Virtual colour wheel including White presets
Pre-programmed colours and rainbow effect
Dimmer, strobe
Electronic dimmer for adjustment of light output from 0 to 100%
with no colour variation (16 bit)
High-speed white or full colour strobe effect with variable 1-25
fps flash rate
Pre-programmed variable strobe effect
Control
DMX 512 USITT
Master / Slave functionalities to manage
several projectors without DMX lighting Desk
17 / 24 / 49 DMX channels required to control all parameters of
the projector
Selectable DMX Modes
Software facilities
Fixture settings for DMX address and functions
DMX-RDM Ready
USER MANUAL
16
Publicité
