Ayrton WILDSUN 200 S Mode D'emploi page 13

Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
2. Automatic Program Run
Select "Function Mode" by turning the encoder.
Press the Enter button to confirm.
Select "Auto Program" by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select "Master" or "Alone". The selection
«Alone» means Stand Alone-mode and «Master» that the
device is defined as master.
Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
3. Program selection for Auto Pro Part
Select "Edit program" by turning the encoder.
Press the Enter button to confirm.
Select "Select programs" by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select "Auto Pro Part 1", "Auto Pro Part
2" or "Auto Pro Part 3", and thus select which Slave program
is to be sent. Selection "Part 1" means, that the Slave unit runs
the same program as the master units.
Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
4. Program selection for Edit Program
• Select "Edit program" by turning the encoder.
• Press the Enter button to confirm.
• Select "Edit program" by turning the encoder.
• Press the Enter button to confirm.
• Turn the encoder to select the desired program. With this
function you can edit specific scenes into a specific program.
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main
menu.
5. Automatic Scene Recording
Select "Edit program" by turning the encoder.
Press the Enter button to confirm.
Select "Edit scenes" by turning the encoder.
Turn the encoder to select the desired scene numbers. You
can program a maximum number of 250 • Turn the encoder
to select the desired scene numbers. You can program a
maximum number of 250 scenes.
Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
Example:
Program 2 includes scenes: 10, 11, 12, 13
Program 4 includes scenes: 8, 9, 10
Program 6 includes scenes: 12, 13, 14, 15
Auto Pro Part 1 is Program 2
Auto Pro Part 2 is Program 3
Auto Pro Part 3 is Program 6
All manuals and user guides at all-guides.com
The 3 Slave groups run the Auto Program in certain time
segments, as shown in the following picture:
Part 1:
Part 2:
Part 3:
USER MANUAL
13
Scene 10 Scene 11 Scene 12
Scene 8S cene 9S cene 10
Scene 12 Scene 13 Scene 14
Scene 13
Scene 8
Scene 15