Ayrton WILDSUN 200 S Mode D'emploi page 12

Reset-functions
With this function you can reset the device via the Control
Board. You can select the different reset functions by turning
the encoder.
1. Tap <MODE/ESC> button, access the main menu, Tap the
<Up/Down> button until "Reset-functions" is displayed. Press
ENTER, the display will show "Reset-functions".
2. The display show "Reset All", Press <Up/Down>, the
display will show "Reset All", "Reset Pan/Tilt", "Reset ZOOM".
3. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Effect Adjust
Test channel
With this function you can test each channel on its (correct)
function.
1. Tap <MODE/ESC> button, access the main menu, Tap the
<Up/Down> button until "Effect Adjust" is displayed. Press
ENTER, the display will show "Effect Adjust".
2. Press <Up/Down>, the display will show "Test Channel".
3. Press <ENTER>, the display will show "Test Channel".
4. The display show "Pan Moving" first channel, Press <Up/
Down>, can choose other channel.
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Manual control
With this function, you can control the light sources more easily.
All effects will be canceled, the shutter opens and the dimmer
intensity will be set to 100 %.
1. Tap <MODE/ESC> button, access the main menu, Tap the
<Up/Down> button until "Effect Adjust" is displayed. Press
ENTER, the display will show "Effect Adjust".
2. Press <Up/Down>, the display will show "Manual control".
3. Press <ENTER>, the display will show "Manual control".
4. The display show "PAN=XXX".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Calibrate values
With this function, you can calibrate and adjust the effect wheels
to their correct positions. The password of calibrate values is
050.
1. Tap <MODE/ESC> button, access the main menu, Tap the
<Up/Down> button until "Effect Adjust" is displayed. Press
ENTER, the display will show "Effect Adjust".
2. Press <Up/Down>, the display will show "Calibrate values".
3. Press <ENTER>, the display will show "Calibrate values".
4. The display show "Password=XXXX".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Users mode set
In this menu, user can select different channels list by different
sequence:
For example, after the user enter this manual, if select Auto
All manuals and user guides at all-guides.com
Program = CH 22, means in this User's mode, the "Dimmer" is
in Channel 16.
User mode
With this function, you can create user defined channel orders.
Preset User mode
With this function, you can adjust the rest user defined channel
order.
Edit program
Select program
With this function, you can select the program for the Program
Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal
programs.
Rec. Controller
The moving head features an integrated DMX-recorder by which
you can transmit the programmed scenes from your DMX-
controller to the moving head. Adjust the desired scene numbers
via the encoder (from – to). When you call up the scenes at your
controller, they will automatically be transmitted to the moving
head.
Excursion
A Master unit can send up to 3 different data groups to the Slave
units, i.e. a Master unit can start 3 different Slave units, which
run 3 different programs. The Master unit sends the 3 program
parts in a continuous loop.
Auto Pro
The Slave unit receives data from the Master unit according to
the group which the Slave unit was assigned to. If e.g. a Slave
unit is set to "Slave 1" in the menu "Set to Slave", the Master unit
sends "Auto Program Part 1" to the Slave unit. If set to "Slave 2",
the Slave unit receives "Auto Program Part 2".
To start a Auto Program please proceed as follows:
USER MANUAL
12
1. Tap <MODE/ESC> button, access the main menu, Tap the
<Up/Down> button until "Users mode set" is displayed. Press
ENTER, the display will show "Users mode set".
2. The display show "User Mode" first channel, Press <Up/
Down> the display will show "Edit User Mode".
3. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Auto Pro Auto Pro Auto Pro Auto Pro
Part 1 Part 2 Part 3 Part 1 Part 2
1. Slave-Setting
Select "Function Mode" by turning the encoder.
Press the Enter button to confirm.
Select "Set to slave" by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select "Slave 1", "Slave 2" or
"Slave 3".
Auto Pro Auto Pro Auto Pro Auto Pro
Part 3 Part 1 Part 2 Part 3