Publicité
Les langues disponibles
Les langues disponibles
Press ENTER, the display will show "Status setting".
2. Press <Up/Down>, the display will show "Mic Sensitivity".
3. Press <ENTER>, the display will show "Mic Sensitivity".
4. The display show "70%", Press <Up/Down>, the display
will show "0~99%".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Hibernation - Standby mode
The step motors will be power off if the fixture stay without DMX
signal for 15 mins (Factory default). And the fixture will be reset
before working once it receive DMX signal again.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/
Down> button until the display will show "Status setting".
Press ENTER, the display will show "Status setting".
2. Press <Up/Down>, the display will show "Hibernation".
3. Press <ENTER>, the display will show "Hibernation".
4. The display show "15M", Press <Up/Down>, the display
will show "01M", "02M" .... "99M" or"OFF".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Fans Control
Head Control
With this function, you can set the speed of the running head
fans. The selections have Auto, high and low.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/
Down> button until the display will show "Fans Control". Press
ENTER, the display will show "Fans Control".
2. Press <Up/Down>, the display will show "Head Control".
3. Press <ENTER>, the display will show "Head Control".
4. The display show "Auto Fans Speed", Press <Up/Down>,
the display will show "High Fans Speed", "Low Fans Speed".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Base Control
With this function, you can set the speed of the running base
fans. The selections have 10%, 30% and 50%.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/Down>
button until the display will show "Fans Control". Press ENTER,
the display will show "Fans Control".
2. Press <Up/Down>, the display will show "Base Control".
3. Press <ENTER>, the display will show "Base Control".
4. The display show "30%", Press <Up/Down>, the display will
show "10%", "50%".
5. Press <ENTER> to confirm or press <MODE/ESC> to return
to the main menu.
Display settings
Shut off time
With this function you can shut off the color LCD display after 2
to 59 minutes. Turn the encoder in order to select the desired
All manuals and user guides at all-guides.com
shut off time. The default is 5 minute.
Display Reverse
With this function you can the entire display to be flipped by 180˚
to allow for better view when the fixture is hung from truss or a
ceiling. This function is disabled as default.
Key Lock
With this function you can activate the automatic keylock status.
If this function is activated, the keys will be locked automatically
after exiting the edit mode for 15 seconds. keeping press the
[MENU] key for 3seconds if you do not need this function.
Temperature C/F
With this function, Display the temperature for Celsius or
Fahrenheit.
Initial effect
With this function, Display initial effect position.
Restore Default
With this function, you can select restore factory set for ON or
OFF, the default is OFF.
USER MANUAL
11
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Display Setting".
3. Press <ENTER>, the display will show "Display Setting".
4. The display show "Shutoff Time", Press <Up/Down>, the
display will show "Display Reverse", "Key Lock".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Temperature
C/F".
3. Press< ENTER>, the display will show "Temperature C/F".
4. The display show "Fahrenheit", Press <Up/Down>, the
display will show "Celsius".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Initial effect".
3. Press <ENTER>, the display will show "Initial effect".
4. The display show "XXX".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Restore Default".
3. Press <ENTER>, the display will show "Restore Default".
4. The display show "OFF", Press <Up/Down>, the display
will show "ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Publicité
