Costway TQ10103 Mode D'emploi page 7

Attach Front Wheels │ 9
3
4
5
1. Slide a Ø10 washer onto the front axle.
2. Slide a normal wheel onto the front axle.
3. Slide a Ø10 washer onto the front axle.
4. Tighten a Ø8 lock nut to the end of the front axle.
5. Insert the hubcap to the front wheel.
Repeat for the other front wheel.
12
2
1
Attach the Steering Wheel &
Connect the Power Supply │ 10
Turn the vehicle body upright.
1. Fit the steering wheel to the end of the steering
column.
2. Line up the holes on the steering wheel with the
holes on the steering column, insert the M5x30
machine screw.
3. Fasten a nut on the opposite end of the screw
with a screwdriver.
4. Plug the red connector on
the vehicle body into the red
connector from the battery.
EN
3
1
2
4
13