Télécharger Imprimer la page

Costway TQ10103 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

Use the Remote Controller │ 15
Forward
button
Reverse
button
Speed selection button
Attach the batteries of controller
Lift the battery compartment door on the back of the controller and insert
two AAA(LR03) batteries.
HINT: Batteries not included.
1. Build connection
Long press the forward and reverse buttons for 3 seconds, and the speed
indicator flashes. Then power on the vehicle, the speed indicator goes to long
bright, which means the connection successful. If the speed indicator has no
response, which means the connection failed. Replace the batteries and retry.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
3. Speed selection button
The switch operates the vehicle to move in low, normal or high speed.
HINT: This switch won't work while your vehicle moves reverse.
NOTE:
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• Rebuild connection when you replace the batteries of the remote controller.
18
Left button
Speed indicator
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
Brake
button
Right
button
This product with Charging Protection: when charging, all functions will be cut
off! Only an adult can charge and recharge the battery!
• The POWER SWITCH must be turned in OFF position when charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not
recharge the battery for more than 10 hours to avoid overheating the
charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month, minimum recharge time as 8 to 12 hours,
less than 20 hours.
• Use the only rechargeable battery and charger supplied with your vehicle.
NEVER substitute the battery or the charger with another brand. Using
another battery or charger may cause a fire or explosion.
• Do not use the battery or charger for any other product.
1. Plug the charger port into the input socket. (below the seat)
2. Plug the charger plug into a wall outlet. The battery will begin charging.
Charging │ 16
WARNING!
WARNING!
EN
19

Publicité

loading