Costway TQ10103 Mode D'emploi page 6

Attach the Left & Right Arm-2 │ 7
3
6
1. Fit a Ø10 washer to the middle axle that passes through the left arm.
2. Tighten a Ø8 lock nut. Tip: Use two Ø8 socket wrenches to tighten the Ø8
lock nuts on both ends of the middle axle at the same time.
3. Fit a arm hubcap on each side of the middle axle.
4. Fit a Ø10 washer to the rotation axle that passes through the left arm.
5. Tighten a Ø8 lock nut. Tip: Use two Ø8 socket wrenches to tighten the Ø8
lock nuts on both ends of the rotation axle at the same time.
6. Fit a arm hubcap on each side of the rotation axle.
10
1
2
3
6
4
5
Attach Driving Wheels │ 8
2
3
4
Turn the vehicle body downside up.
1. Slide a driving wheel onto the rear axle. Ensure the driving wheel matches
up with gear box on the vehicle body.
2. Slide a Ø10 washer onto the rear axle.
3. Tighten a Ø8 lock nut to the end of the rear axle.
4. Insert the driving wheel hubcap to the driving wheel.
Repeat steps1-4 for the other driving wheel.
1
EN
11