Technical Characteristics; Electromagnetic Polishing; Unpack; Installation And Start Up - Ugin MINICLEAN 2 Mode D'emploi

Instructions for use
(rev 08/18)

1. TECHNICAL CHARACTERISTICS

 Size and weight:
- Height: 190 mm
- Width: 175 mm
- Depth: 190 mm
- Weight: 4,5 Kg
 Electric power supply: 230 V – 50/60 Hz
 Power: 25W
 Rotation speed: 1200 revolution per minute
 Temporization: 0 to 30 minutes

2. ELECTROMAGNETIC POLISHING

A rotating magnetic field is the key to the outstanding effectiveness of MINICLEAN 2:
- allows un just a few minutes, the complete cleaning of dental prosthesis;
- this cleaning system does not deteriorate the prosthesis, and will slightly polish all surfaces;
- it will eliminate old cement parts as well as dental plaque, to produce a clean prosthesis;
- small in size, and easy to use, it can be integrated in a lab or dental office.

3. UNPACK

 Unpack MINICLEAN 2 and check that it is in perfect order, so that any defects can be reported
to the carrier.
 Remember to get the carrier to sign the delivery note

4. INSTALLATION AND START UP

- Place the machine in a flat surface
- After checking that the mains voltage matches that noted on the rating plate, plug the cord into
a standard 10/16A socket with a ground terminal.
UGIN DENTAIRE
MINICLEAN 2
12