Ec Declaration Of Conformity; Technical Information; Installation And Start-Up; Unpack - Ugin UGISAB Mode D'emploi

Instructions for use (rev 010721)

2. EC DECLARATION OF CONFORMITY

The equipment's EC declaration of conformity is provided as appendix of instructions for use.
Content of the declaration EC:
▪
Name and address of the manufacturer:
UGIN DENTAIRE. 25 rue de la Tuilerie. 38170 SEYSSINET-PARISET – FRANCE
▪
UGIN DENTAIRE declares, on its own exclusive responsibility, that the product:
- Sandblaster UGISAB
- Serial number: see the equipment's EC declaration of conformity
▪
Fulfills the essential requirements of health and safety of the following directives:
- Machinery directive 2006/42/EC
- Electromagnetic compatibility directive 2014/30/EU

3. TECHNICAL INFORMATION

Sandblaster UGISAB has to be operated only by dental professionals and in the conditions described in this
manual (see chapter 1.1).
TECHNICAL DATA
Working pressure
Air consumption
Blasting nozzle
Lighting
Dust filtration
Voltage
Power
Dimensions
- Height
- Width
- Depth
Net and gross weight

4. INSTALLATION AND START-UP

4.1. UNPACK

- Unpack UGISAB and check that it is in perfect order.
- Any defects can be reported to the carrier.
- Remember to get the carrier to sign the delivery note.
NOTE: keep the original packaging to transport the equipment.
UGIN DENTAIRE
Minimum 2 bar – Maximum 6 bar
100 L/min to 4 bar
Ø 3.0 mm in tungsten carbide
Compact energy – 42 LED
Connection to the WAFIS or PRO-3 SHAKE filtering
system (in option, not included)
230 V – 50/60 Hz
6 W – 0.2 A
390 mm
350 mm
290 mm
8.6 kg and 115 kg
UGISAB
17