Konica Minolta Bizhub 362 Manuel D'installation page 4

5. Slide out the drawer and remove the protective
tape.
6. Slide the drawer back in.
7. Remove the protective sheet.
8. Turn the scanner lock lever to unlock the scan-
ner.
9. Affix the scanner lock lever seal.
All manuals and user guides at all-guides.com
VII. Loading the Starter
1. Open the right door and remove the imaging unit
(IU).
A11UIXC004MA
2. Remove screws that secure the PC drum unit in
position (two silver screws each on the right and
left sides).
3. Slightly opening the lower part (the shadowed
portion) on both sides of the PC drum unit, take
out the PC drum unit.
Note:
Do not touch or scratch the PC drum.
Cover the PC drum unit, which has been
removed, with a protective cloth or similar mate-
rial.
A11UIXC009MA
PC drum unit
4. Remove the
screws).
A11UIXC010MA
E-4
A11UIXC011MA
Developing unit
A11UIXC012MA
developing unit cover (three
A11UIXC013MA