Konica Minolta Bizhub 362 Manuel D'installation page 16

38.Touch "TX/RX Test", and touch the Start key to
perform transmission. Check whether transmis-
sion is performed normally. When transmission
fails, check according to the error message and
try transmitting again.
39.Keep touching "END" until Tech. Rep. Mode is
displayed.
40.Touch "Exit" on the Tech. Rep. Mode screen.
Note:
When the Tech. Rep. Mode is finished being dis-
played, turn main power OFF and wait for 10 sec-
onds or more before turning main power back ON.
All manuals and user guides at all-guides.com
E-16