Scheppach HL810 Traduction Des Instructions D'origine page 20

( [ S ODQDW L R Q R I W K HV\ P ER O VR Q W K HSU R G X F W
The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the
explanations that accompany them must be perfectly understood. The warnings in themselves do not remove the
risks and cannot replace correct actions for preventing accidents.
Please read the manual before
start-up
No smoking in the working area
Wear work gloves
Wear safety goggles. Sparks created
during work or fragments, chippings
and dust ejected by the product can
cause sight loss.
Wear safety footwear
Do not spill hydraulic oil on the floor
Keep your workspace clean! Untidi-
ness can cause accidents!
The machine must only be operated
by one person!
Caution! Moving machine parts!
In this operating manual, we have
used this sign to mark all sections
m Attention!
that concern your safety.
20 | GB
2x
Oil
Oil
www.scheppach.com
Dispose of waste oil correctly (waste
oil collection point on site). Do not
dump waste oil in the ground or mix
it with waste.
Do not remove or modify protection
and safety devices.
Only the operator is allowed in the
work area of the machine. Keep
other people and animals (minimum
distance 5 m) at a distance.
Do not remove jammed trunks with
your hands.
Caution! Switch off the engine before
repair, maintenance and cleaning.
Unplug the mains plug.
Danger of bruising and injury from
sharp edges; never touch danger
areas when the cleaver is moving.
High-voltage, danger to life!
Loosen the vent bolt two revolu-
tions, before starting work. Close
before transport.
Do not transport the device in the
horizontal position!
The product complies with the
applicable European directives.