Kenmore C970 Serie Manuel D'utilisation Et D'entretien page 19

Self-Cleaning
Select Clean
Nettoyage
4. Press . "— — —" appears in the display.
5. Press the or
"2:00" appears in the display or to select a 4 hour cycle press
As soon as the controls are set, the motor driven lock will begin to close automatically and the "DOOR LOCK" indicator
light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to
lock).
6. "CLn" will appear in the display during the Self-Clean cycle and the "DOOR LOCK" light will glow until the Self-Cleaning
cycle is complete or cancelled and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day or "End" will appear in the display window and the "Clean" and "DOOR LOCK" light will continue to
glow.
2. Once the oven has cooled down for about 1 HOUR and the "DOOR LOCK" light has gone out, the oven door can be
opened.
3. If "End" is in the display and the Select Clean indicator light remains ON, press
display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
STOP
ARRÊT .
1. Press
2. Once the oven has cooled down for about 1 HOUR and the "DOOR LOCK" light has gone out, the oven door can be
opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the
side of the oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY
HOT.
Adjusting the Oven Temperature
Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your
recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your
recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.
To Adjust Oven Temperature:
Bake
Cuire
1. Press .
2. Set the temperature to 550°F (287°C) by pressing and holding the
3. Within 2 seconds, press and hold
amount of degrees offset between the original factory temperature setting and the current temperature setting. If the
oven control has the original factory calibration, the display will read "0."
4. The temperature can now be adjusted up or down 35°F or 19°C, in 5°F or 1°C steps by pressing and holding the
. Adjust until the desired amount of offset appears in the display. When lowering the oven temperature,
or
a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of
degrees.
5. When you have made the desired adjustment, press
Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.
once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press
Bake
Cuire until the 2 digit display appears. Release
. "4:00" appears in the display.
.
STOP
ARRÊT
to go back to the time of day display.
19
STOP
ARRÊT
. The time of day will appear in the
Bake
Cuire . The display now indicates the
.