Télécharger Imprimer la page

Valor L1 Serie Instructions D'installation page 4

Publicité

Les langues disponibles

Les langues disponibles

Installation of the barrier screen
1. Hold the screen on the sides and locate the top into
the channel inside the top section of the surround.
2. Grab the fi nger tabs on the bottom of the frame and
lower the screen straight down locating the bottom
hooks into slots hidden just behind surround plate.
Finger tab
Front tab
3. Verify that the screen is properly hooked to the trim
and secure.
4
All manuals and user guides at all-guides.com
Removing the screen
The barrier screen will need to be removed to access
the fi replace controls or for maintenance.
To remove the screen, hold both fi nger tabs and lift and
tilt the bottom towards you, lower screen to clear the
surround and away from the fi replace.
Maintenance
To clean the fi replace trim, use mild soap and water.
To clean the barrier screen, dust with a soft brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer's barrier for this
appliance.
To clean the window and ceramics inside the fi rebox,
consult the Owner's Information section of the
Installation and Owner's Manual supplied with the
fi replace.
DO NOT CLEAN THE GLASS WINDOW WITH
AMMONIA!
WARNING
!
WARNING
DO NOT TOUCH THE BARRIER SCREEN OR
DO NOT TOUCH THE BARRIER SCREEN OR
FIREPLACE WHILE THEY ARE HOT! Let the
FIREPLACE WHILE THEY ARE HOT!
fi replace cool fi rst before cleaning it.
fi replace cool fi rst before cleaning it.
FOR SAFETY PURPOSE, ensure the barrier
FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fi replace front after
screen is re-installed on the fi replace front after
maintenance if it has been removed.
maintenance if it has been removed.
Let the

Publicité

loading