Publicité
Les langues disponibles
Les langues disponibles
1. General safety instructions
1. General safety instructions
Signal word: Possible immediate effects of non-com-
pliance
WARNING: Death or serious injury (possible, but un-
likely)IMPORTANT: Property damage or malfunction,
NOTE: Low or none
WARNING
Blocked access
Access through a door may stay blocked due to incor-
rectly fitted and/or incorrectly programmed compon-
ents. SimonsVoss Technologies GmbH is not liable for
the consequences of blocked access such as access
to injured or endangered persons, material damage or
other damage!
Blocked access through manipulation of the product
If you change the product on your own, malfunctions
can occur and access through a door can be blocked.
Modify the product only when needed and only in
the manner described in the documentation.
IMPORTANT
Damage resulting from electrostatic discharge
(ESD)
This product contains electronic components that
may be damaged by electrostatic discharges.
1. Use ESD-compliant working materials (e.g.
Grounding strap).
2. Ground yourself before carrying out any work that
could bring you into contact with the electronics.
For this purpose, touch earthed metallic surfaces
(e.g. door frames, water pipes or heating valves).
Damage resulting from liquids
This product contains electronic and/or mechanic
components that may be damaged by liquids of any
kind.
Keep liquids away from the electronics.
Damage resulting from aggressive cleaning agents
The surface of this product may be damaged as a res-
ult of the use of unsuitable cleaning agents.
Only use cleaning agents that are suitable for
plastic or metal surfaces.
16 / 36
Damage as a result of mechanical impact
This product contains electronic components that
may be damaged by mechanical impacts of any kind.
1. Avoid touching the electronics.
2. Avoid other mechanical influences on the electron-
ics.
Damage due to polarity reversal
This product contains electronic components that
may be damaged by reverse polarity of the power
source.
Do not reverse the polarity of the voltage source
(batteries or mains adapters).
Operational malfunction due to radio interference
This product may be affected by electromagnetic or
magnetic interference.
Do not mount or place the product directly next to
devices that could cause electromagnetic or mag-
netic interference (switching power supplies!).
Communication interference due to metallic sur-
faces
This product communicates wirelessly. Metallic sur-
faces can greatly reduce the range of the product.
Do not mount or place the product on or near
metallic surfaces.
NOTE
Intended use
SimonsVoss-products are designed exclusively for
opening and closing doors and similar objects.
Do not use SimonsVoss products for any other pur-
poses.
Qualifications required
The installation and commissioning requires special-
ized knowledge.
Only trained personnel may install and commission
the product.
Modifications or further technical developments can-
not be excluded and may be implemented without no-
tice.
The German language version is the original instruction
manual. Other languages (drafting in the contract lan-
guage) are translations of the original instructions.
Read and follow all installation, installation, and com-
missioning instructions. Pass these instructions and
any maintenance instructions to the user.
Transponder terminal
EN
Publicité
