Flex L 1710 FRA Notice D'instruction D'origine page 13

Angle grinder
Contents
Symbols used in this manual . . . . . . . . . 13
Symbols on the power tool. . . . . . . . . . . 13
For your safety . . . . . . . . . . . . . . . . . . . . 13
Noise and vibration . . . . . . . . . . . . . . . . 17
Disposal information. . . . . . . . . . . . . . . . 17
Declaration of Conformity . . . . . . . . 17
Technical specifications . . . . . . . . . . . . . 18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 19
Instructions for use. . . . . . . . . . . . . . . . . 19
Maintenance and care . . . . . . . . . . . . . . 21
Declaration of Conformity . . . . . . . . 22
Exemption from liability . . . . . . . . . . . . . 22
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
machine (see page 17)!
For your safety
WARNING!
Before using the angle grinder, please read
and follow:
these operating instructions,
–
the "General safety instructions" on the
–
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the regu-
–
lations for the prevention of accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool may
be a danger to life and limb of the user or a third
party, or the power tool or other property
may be damaged. The angle grinder may
be operated only if it is
as intended,
–
in perfect working order.
–
Faults which impair safety must be repaired
immediately.
Intended use
This angle grinder
– for commercial use in industry and trade,
– is designed for dry grinding and cutting
metal and stone,
– for grinding surfaces, for derusting and
stripping paint when used with the elastic
sanding pad,
– for polishing unpainted metal surfaces
(L 1506 VR and LE 14-7 125 INOX only),
– for use with grinding tools and
accessories which are indicated
in these instructions or recommended
by the manufacturer.
Not permitted are e.g. chain cutting wheels,
saw blades.
13