English; Priority Instructions; Description And Uses Of The Equipment - Tractel PP Séries Notice D'utilisation

In order to ensure the continuous improvement of its products, TRACTEL SOLUTIONS S.A.S reserves the right to
modify the specifications of the equipment described in this manual without notice.
This manual outlines all necessary instructions for the safe and the correct operation of the TOPAL clamps.
In the interests of safety and for the efficiency of the equipment, you must make yourself familiar with these
instructions and adhere to them before any use of the equipment.
The clamp can be used only by skilled and authorised personnel
Never use this clamp to lift or transport persons.

 Never exceed the working load limit WLL (see marking).
 A minimum load of 5% of the WLL of the clamp must be respected for correct operation.
 Never weld on the equipment or alter it.
 Never use the clamp for any use other than what it is designed for.
 In the interests of safety, never stand or walk under the load.
 When setting down a load, the object must be stable before opening the clamp.
Regularly check the correct condition of the equipment (see Inspections and Storage & Maintenance

paragraphs).
Only TRACTEL SOLUTIONS spare parts must be used.

Lifting operations can only be done when the environment is free of obstacles


DESCRIPTION AND USES OF THE EQUIPMENT

 Clamp for vertically lifting various loads with parallel sides
The pads are hinged and available in different versions, see table below

Pads
PVC or CR
"Standard"
PU
"PU"
Grained
"MG"
Spiked
"MO"
Adjustment of the min./max. opening by pin configuration.

4 Stone, concrete, metal, etc.
Wood, plastic, etc.
5
Rubber, foam, cardboard, etc.
6
M 6112 M
rev 7 – 06/2021

English

PRIORITY INSTRUCTIONS

Abrasive
Not recommended
 pad wear
Non-
marking
Marking
GB
Load
Fragile
Not recommended 
scratches on the load
Hard 4 Medium 5 Soft 6
Page 11/28
www.tractel.com