Télécharger Imprimer la page

Skil 3920 Notice Originale page 12

Publicité

e) Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kickback.
Large workpieces tend to sag under their own weight.
Supports must be placed under the workpiece near the
line of cut and near the edge of the workpiece on both
sides of the wheel.
f) Use extra caution when making a "pocket cut" into
existing walls or other blind areas. The protruding
wheel may cut gas or water pipes, electrical wiring or
objects that can cause kickback.
ADDITIONAL SAFETY INSTRUCTIONS
GENERAL
This tool is not suitable for wet grinding/cutting
Only use the flanges which are supplied with this tool
This tool should not be used by people under the age of
16 years
Remove battery from tool before making any
adjustments or changing accessories
ACCESSORIES
SKIL can assure flawless functioning of the tool only
when original accessories are used
For mounting/using non-SKIL accessories observe the
instructions of the manufacturer concerned
Use only grinding/cutting discs with a maximum
thickness of 6 mm and a spindle hole diameter of
22 mm
Never use reducors or adaptors to fit large-hole grinding/
cutting discs
Never use accessories with a "blind" threaded hole
smaller than M14 x 21 mm
Handle and store grinding/cutting discs carefully to avoid
chipping and cracking
BEFORE USE
Before using the tool for the first time, it is recommended
to receive practical information
Always mount auxiliary handle E 2 and protective guard
F 2 ; never use the tool without them
Use suitable detectors to find hidden utility lines
or call the local utility company for assistance
(contact with electric lines can lead to fire or electrical
shock; damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
an electrical shock)
Do not work materials containing asbestos (asbestos
is considered carcinogenic)
Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders); wear a dust mask and work with a dust
extraction device when connectable
Certain kinds of dust are classified as carcinogenic
(such as oak and beech dust) especially in conjunction
with additives for wood conditioning; wear a dust
mask and work with a dust extraction device when
connectable
Follow the dust-related national requirements for the
materials you want to work with
Be careful when cutting grooves, especially in supporting
walls (slots in supporting walls are subject to country-
specific regulations; these regulations are to be observed
under all circumstances)
Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand)
Do not clamp the tool in a vice
DURING USE
In case of electrical or mechanical malfunction,
immediately switch off the tool and remove battery
In case of a battery protection cut off, or when the
battery is removed, the tool will not restart on its own; for
restarting the tool unlock on/off switch and switch on tool
again w
AFTER USE
After switching off the tool, never stop the rotation of the
accessory by a lateral force applied against it
BATTERIES
The battery supplied is partially charged (to ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for the
first time)
Only use the following batteries and chargers with
this tool
- SKIL battery: BR1*31****
- SKIL charger: CR1*31****
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose tool/battery to rain
Permitted ambient temperature (tool/charger/battery):
- when charging 4...40°C
- during operation –20...+50°C
- during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3 Read the instruction manual before use
4 Wear protective glasses and hearing protection
5 Batteries may explode when disposed of in fire, so do not
burn battery for any reason
6 Store tool/charger/battery in locations where temperature
will not exceed 50°C
7 Do not dispose of electric tools and batteries together
with household waste material
USE
Charging battery
! read the safety warnings and instructions
provided with the charger
Removing/installing the battery 2
Battery level indicator 8
- press the battery level indicator button L to show the
current battery level 8 a
! when the lowest level of the battery indicator
starts flashing after pressing button L 8 b, the
battery is empty
! when 2 levels of the battery indicator start flashing
after pressing button L 8 c, the battery is not
within the allowable operating temperature range
Battery protection
The tool is suddenly being switched off or prevented from
being switched on, when
- the load is too high --> remove load and restart
- the battery temperature is not within the allowable
operating temperature range of -20 to +50°C --> 2
levels of the battery level indicator start flashing when
pressing button L 8 c; wait until battery has returned
within the allowable operating temperature range
- the battery is nearly empty (to protect against
deep discharge) --> a low battery level or flashing low
battery level 8 b is shown by the battery level indicator
when pressing button L; charge battery
12

Publicité

loading

Ce manuel est également adapté pour:

3921