Publicité
Les langues disponibles
Les langues disponibles
Installation must be performed in accordance with Local and NEC codes.
120/240 VAC
POWER
PUMP
Preparing Pool/Spa Water
Refer to page 3 for recommended chemical levels. The pool's chemistry must be balanced BEFORE
activating the AquaRite. NOTE: If the pool does not have new water, add 1 quart (1 liter) of metal
remover and 1 quart (1 liter) of non-copper based algaecide to the pool, per manufacturer's instruc-
tions. This ensures a quick, troublefree transfer to the AquaRite system.
Mounting the AquaRite Control
The AquaRite is contained in a raintight enclosure that is suitable for outdoor mounting. The control
must be mounted a minimum of 5 ft. (2 meters) horizontal distance (or more, if local codes require)
from the pool/spa.
The control is designed to mount vertically on a flat surface with the knockouts facing downward.
Because the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not
to block the four sides of the control. Do not mount AquaRite inside a panel or tight enclosed area.
11
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Installation
FILTER
TIMER
LINE
LOAD
SOLAR
SYSTEM
FILTER
FROM
FROM
SPA
POOL
AQUA
RITE
BOOST
AUTO
OFF
BOOST
AUTO
OFF
G
LDLINE
CONTROLS INC.
HEATER
ELECTROLYTIC
CELL
IN-FLOOR
CLEANER
TO
POOL
FLOW
SWITCH
TO
SPA
Publicité
