Publicité
Les langues disponibles
Les langues disponibles
6. Learnings
6.1 Learning a transmitter through the "RADIO LEARN" key of the control unit
Button "UP"
6.1.1 Learning of a two buttons transmitter
STOP THE
AUTOMATION
Press and release the UP button of the transmitter. The
buzzer emits a short beep.
Wait few seconds for the automatic learning of the DOWN
button. Otherwise press and release the DOWN button of
the transmitter. The buzzer emits a short beep followed by
two long and two short beeps.
6.1.2 Learning of a three buttons transmitter
STOP THE
AUTOMATION
Press and release the UP button of the
transmitter. The buzzer emits a short beep
Press and release the STOP button of the
transmitter . The buzzer emits a short beep
Press and release the DOWN button of the
transmitter . The buzzer emits a short beep
followed by two long beeps and two short ones.
6-1622605
rev.0
07/05/2013
All manuals and user guides at all-guides.com
Button"DOWN"
Press and release the RADIO LEARN
button. The buzzer emits long beeps each
second
SI
SI
SI
The 2 buttons are learnt and the
procedure
finishes.
Repeat
procedure if you wish to learn a new
transmitter.
Press and release the RADIO
LEARN button. The buzzer
emits some long beeps each
second.
SI
SI
SI
SI
The 3 buttons have been learnt and
the procedure finishes. Repeat the
procedure if you wish to learn a new
transmitter.
ITA
Button "UP"
Check that the automation is still.
NO
If the buzzer emits a long beep and two short ones, the
NO
transmitter was already been memorized. If the buzzer
does not make any signal verify that the transmitter
works and belongs to the B.ro Series.
If the buzzer does not emit any signal, repeat the
NO
procedure with another transmitter.
the
Check that the automation is still.
NO
If the buzzer emits one long beep and two short ones, the
transmitter was already been learnt. If the buzzer does not make
NO
any signal check that the transmitter works and belongs to the B.ro.
Series.
If the buzzer does not make any signal, repeat the
NO
procedure with another transmitter.
If the buzzer does not make any signal, repeat the
NO
procedure with another transmitter.
ENG
FRA
ESP
DEU
POR
Button "STOP"
Button "DOWN"
4 / 8
Publicité
