Publicité
Les langues disponibles
Les langues disponibles
EN
There is an odor
coming from the
heater.
NOTE: For the most of functional problems, you can unplug the unit wait
for 10 minutes and plug it again, the machine will reset to the initial
status (product originals).
If the problem is still not solved, ask qualified technician for help.
7.0 MAINTENANCE
DISCONNECT POWER AND ALLOW HEATER TO COOL BEFORE
ATTEMPTING ANY MAINTENANCE OR CLEANING TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK OR DAMAGE TO PERSON.
THE FIREPLACE SHOULD NOT BE OPERATED WITH AN
ACCUMULATION OF DUST OR DIRT ON OR IN THE UNIT, AS THIS
CAN CAUSE A BUILD UP OF HEAT AND SUBSEQUENT EVENTUAL
DAMAGE. FOR THIS REASON THE HEATER MUST BE INSPECTED
REGULARLY, DEPENDING ON CONDITIONS AND AT LEAST AT
YEARLY INTERVALS.
7.1 PARTIALLY REFLECTIVE GLASS
CLEANING
The partially reflective glass is cleaned in the factory during the assembly
operation. During shipment, installation, handling, etc., the partially
reflective glass may collect dust particles; these can be removed by dusting
lightly with a clean dry cloth.
To remove fingerprints or other marks, the partially reflective glass can be
cleaned with a damp cloth. The partially reflective glass should be
completely dried with a lint-free cloth to prevent water spots. To prevent
scratching, do not use abrasive cleaners.
The heater may emit a slight, harmless odor when
first used. This is a normal condition caused by initial
heating of the internal parts and will not occur again.
29
Publicité
