Publicité
Les langues disponibles
Les langues disponibles
EN
NOTE
LISTING APPROVALS
This appliance has been tested in accordance with the ETL Standards for
fixed and location-dedicated electric room appliances in the United States
and Canada. If you need assistance during installation, please contact
qualified technician.
NOTE: This appliance must be
electrically wired and grounded in
accordance with local or, in the
absence of local, with National
Electric Code ANSI/NFPA 70-latest
edition in the United States or the
Canadian Electric Code and ETL in
Canada.
2.0 ELECTRICAL INSTALLATION NOTES
2.1 GENERAL INSTRUCTIONS
CAUTION - Some parts of this product can become very hot
and cause burns. Particular attention has to be given where
children and vulnerable people are present.
A.Prior to plugging your appliance into an electrical outlet, verify that the
house circuit breakers for the outlet are on.
B.The appliance may emit a slight, harmless odor when first used. This odor
is normal and caused by the initial heating of internal appliance elements,
and the odor will not occur again.
C.If your appliance does not emit heat, consult the operation section of this
manual for further information.
D.Use with an ETL or UL certified surge protector.
Please leave enough space to place the power cord on
the right side of the fireplace.
10
Model No.
FP10165/FP10166/FP10167
Description
Wall-mount, recessed
Voltage
120 VAC
Watts
Max 1500W
Amps
12.5AMP
BTUs
5100BTU
Publicité
