Publicité
Les langues disponibles
Les langues disponibles
EN
Step 7. Hanging the Glass Frame
-Connect the FFC connector before attaching the glass frame on the
appliance.
-Gently engage the glass panel by aligning the 4 hooks until the hooks snap
into the corresponding positions (sinks down 1-2 cm/0.4-0.8 inches).
-Secure the glass panel with the screw removed in Step 1 (or part B).
WARNING: It's better to reserve some space between the frame and
the wall to enable better air circulation if available.
Step 8. Refasten the Glass Frame
1PC
M4X12 SCREW
-Thread the M4 X 12 screw
into the threaded holes on
the glass panel. Check the
alignment of the glass
panel and
securely tighten the
screws.
21
Publicité
