Publicité
Les langues disponibles
Les langues disponibles
EN
Step 8. Hanging the Glass Frame
-Connect the FFC connector before hanging the glass frame on the
appliance.
-Gently place the glass panel by aligning the 4 hooks until it snaps into
position (sinks down 1-2 cm/0.4-0.8 inches).
-Secure the glass panel with the screw removed in Step 1 (or part B).
Step 9. Refasten the Glass Frame
- Thread the M4X12 screw into the threaded holes on the glass panel. Check
the alignment of the glass panel and securely tighten the screws.
( Only for all models of style C which has no mesh for the air inlet.)
1PC
M4X12 SCREW
18
Publicité
