Publicité
Les langues disponibles
Les langues disponibles
EN
WARNING: Do not move or remove the mesh trim panel, when the appliance
is plugged in and operating. This will cause the remote control and touch
panel to no longer function.
NOTICE: When the heater is turned on for the first time, a slight odor may
be present. This is normal and should not occur again unless the heater is
not used for a long period of time.
NOTICE: To improve the heater's performance, aim the remote control at the
front of the fireplace. DO NOT press the buttons too quickly. Give the unit
enough time to respond to each command.
5.3 REMOTE CONTROL
• Move the battery's transparent insulating piece away before using.
Battery (CR 2025)
Battery Holder
6.0 TROUBLE SHOOTING GUIDE
PROBLEM
I.The mounting bracket is pre-attached. Unscrew the two
The
screws at both sides of the fireplace with a Phillips
mounting
screwdriver, and then remove the pre-attached mounting
bracket
bracket.
cannot be
2.If the problem is still not solved, please ask qualified
removed
technician for help.
Remote
(REAR VIEW)
SOLUTION
25
Battery must be
recycled or disposed
of properly. Check
with your Local
Authority or Retailer
for recycling advice in
your area.
Publicité
