Publicité
Les langues disponibles
Les langues disponibles
EN
Installation - Built in Construction
Step 1. Removing the Glass Frame
Step 2. Removing the Mounting Bracket
(Step 1 and Step 2 please refer Wall Hanging Installation.)
Step3. Settling the Holes of Screw
-The appropriate cavity (l-2cm/0.4-0.8 inches bigger for each side) needs
to be prepared according to the size of the appliance.
-Put the fireplace in place, mark the holes which need to be drilled with a
pencil. Then take it out of the cavity again.
Step 4. Drilling & Installing the Wall Anchors
-Drill the holes 7/25 in.
(7mm) on the prepared
marks.
-Insert the wall anchors
(Part B) into the holes
using a hammer.
19
Publicité
