Publicité
Les langues disponibles
Les langues disponibles
EN
RISK OF FIRE! THE POWER CORD MUST NOT BE PINCHED
AGAINST A SHARP EDGE. SECURE CORD TO AVOID TRIPPING
OR SNAGGING TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PERSONAL INJURY.
DO NOT RUN CORD UNDER CARPETING. DO NOT COVER CORD
WITH THROW RUGS, RUNNERS, ETC.
ARRANGE THE CORD AWAY FROM HIGH-TRAFFIC AREAS TO AVOID A
TRIPPING HAZARD.
RISK OF FIRE. TO PREVENT A POSSIBLE FIRE, DO NOT BLOCK AIR INTAKE
OR EXHAUST IN ANY MANNER. DO NOT USE IT ON SOFT SURFACES WHERE
OPENINGS MAY BECOME BLOCKED.
RISK OF FIRE. DO NOT BLOW OR PLACE INSULATION AGAINST THE
APPLIANCE.
THIS ELECTRIC APPLIANCE IS TESTED AND LISTED FOR USE ONLY WITH
THE APPROVED OPTIONAL ACCESSORS. USE OPTIONAL ACCESSORIES NOT
SPECIFICALLY TESTED FOR THIS ELECTRIC APPLIANCE COULD RESULT IN A
SAFETY HAZARD.
IF THE INFORMATION IN THESE INSTRUCTIONS IS NOT FOLLOWED
EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL
INJURY OR DEATH. DO NOT STORE OR USE GASOLINE OR OTHER
FLAMMABLE VAPORS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
THIS APPLIANCE IS HEAVY. IT IS HIGHLY RECOMMENDED THAT TWO
PEOPLE INSTALL THIS APPLIANCE.
HEATER VENTS ON THE ELECTRIC APPLIANCE CANNOT, IN ANY WAY, BE
COVERED. AS IT MAY CREATE A FIRE HAZARD.
Follow all National and local electrical codes.
1.The heaters should be installed only using the mounting brackets we
provided if you want to mount them.
2.The heater must not be recessed in the ceiling. There must be enough
space around the top of the heater to ensure adequate ventilation.
3. The heater should be at least 60cm/24 inches away from any surrounding
walls.
4.A distance of at least 90cm/36 inches should always be left in front of the
heaters to ensure safety.
5.The heater must be located neither directly below nor in front of a
socket-outlet.
6.The heater must be installed to prevent any control switches from being
touched by anyone who is in the shower or bath.
11
Publicité
