Publicité
Les langues disponibles
Les langues disponibles
EN
Step 2. Removing the Mounting Bracket
-Unscrew the two screws by Phillips screwdriver from both ends (Do not
discard them), then remove the pre-attached mounting bracket.
Step 3. Choosing a Wall Location
-Find a safe location. Minimum clearance between the ceiling and the mantel
must be at least 8 inches (200mm); minimum clearance from the front must
be at least 3 feet (900 mm).
Choose a location near an outlet so an extension cord is not required.
Note: DO NOT position the unit directly below a power outlet. See Safety
Information on pages 2 and 3 for more warnings about placement,
installation, and use of this product.
M5x12
200mm
200mm
15
Publicité
