Publicité
Les langues disponibles
Les langues disponibles
EN
POWER
DIMMER
TIMER
FLAME
SPEED
HEATER
COLOR A
COLOR B
Turn the appliance ON/OFF.
NOTE: Make sure the main switch fireplace is
turned on before operating.
Control Flame brightness.
5 Settings: ( L1-L2-L3-L4-L5 ) Flame dims
from L1 to L5. L5 is the brightest setting.
NOTE: Long press the "DIMMER" button for 6
seconds, and the appliance will go into sleep
mode: all the lights are off, but the heating
function goes on.
Long-press again (>6 sec.) to restore the
appliance to the normal mode.
Control the Timer.
8 Settings: ( 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h)
Press button until reach desired setting.
Control Flame speed.
5 Settings: ( U1-U2-U3-U4-U5 ) Flame speed
from U1 to U5. U5 is the fastest setting
Control the Heater.
Press the button to initiate the heater.
(OFF) no heater or blower.
(-),heater blows warm air(750W)
(--),heater blows hot air(1500W)
NOTE: Heater functions cycle from (OFF) (-)(--)
Control the flame color.
12 Settings: l.red 2.yellow 3.blue 4.orange
5.red & yellow 6.red & blue7.red & orange
8.yellow & blue 9. yellow & orange l0.blue &
orange 11.red & yellow & blue 12.multi-color
NOTE: When you press the button for 6
seconds, the indicator will show digital "0", and
the flame color and brightness will be changed
automatically.
Control the flame bed color.
12 Settings: 1.red 2.gentian blue 3.green
4.pink 5.yellow 6.cyan 7.purple 8.white
9.saffron 10.sky blue 11.verdant 12.capri blue
NOTE: When you press the button for 6
seconds, the indicator will show digital "0", and
the flame color and brightness will change
automatically.
24
Publicité
