Publicité
Les langues disponibles
Les langues disponibles
EN
The control
1 .Make sure the Power Switch on the control panel is
panel
turned on before operation.
functions do
2.Make sure you have reconnected the data cable which
not work.
was pulled out when you removed the glass frame.
3.If the problem is still not solved, please ask qualified
technician for help.
Sudden
1.Don't cover the air outlet.
power outage
2.Unplug the unit, and wait for 10 minutes and try to
during the
open it again.
heating
3.If the problem is still not solved, please ask qualified
process
technician for help.
The appliance
This is normal. The fans blow cool air while the appliance
does not blow
gradually heat up. The fans blow after the appliance turn
hot air when
off to cool the appliance and prevent overheating.
it turns on
and off.
1. Main Power
supply switch is
off.
2. Circuit breaker
has been tripped.
3. Heater is
unplugged from
Heater
the wall outlet.
doesn't turn
on with the
power switch.
4. Power cord or
power plug are
damaged.
5. Power outlet for
power plug prong
is loose.
6. Loose wiring.
Turn the main power supply switch
to "ON" position.
Too many appliances are on this
circuit. Make sure that the
electrical supply for this unit is an
independent circuit.
Make sure the power cord is
plugged into a functioning and
properly grounded 15 Amp 120V
AC electrical outlet.
Contact a qualified electrician to
replace the power
Check the power outlet and
replace it with a new one.
Contact a qualified electrician to
check all wiring for loose
connections.
26
Publicité
