Télécharger Imprimer la page

Signature Kitchen Suite SKSSV3001S Guide D'installation page 7

Masquer les pouces Voir aussi pour SKSSV3001S:

Publicité

Les langues disponibles

Les langues disponibles

Part 2
INSTALLATION REQUIREMENTS
Cutout Dimensions (Flush)
Gas or electric cooktops may be installed over this oven.
See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
Top and/or side fillers
may be necessary if
unit is positioned
between existing
cabinets. Be sure they
are attached securely
since, they will anchor
the oven in the cabinet.
1 3/8" (3.5 cm) cleat
(spacer) inset from
front of cabinet
240 V / 208 V
Junction box location
3"ø hole required
(Junction box may be
in adjacent cabinet)
29 5/8" (752.4 mm)
30" (762 mm)
3/4" (1.9 cm) bottom of
bottom decorative trim
to vent opening
- 7 -
Gas and electrical connections for
30" (762 mm) gas cooktop must be located
in an adjacent accessible location to the
right. For a 36" (914 mm) gas cooktop, the
connections may be made to the left.
5"
Allow 11/16" (17 mm)
23 1/2" (596.9mm)
overlap top of oven
from the cutout
base
25"
(635 mm)
Cabinet
36" (914 mm)
Typical
Countertop
Height
2 3/4"(70 mm) ~ 4"(102 mm)

Publicité

loading

Ce manuel est également adapté pour:

Sksdv3002sSkscv3002s