Publicité
Les langues disponibles
Les langues disponibles
Part 4
INSTALL THE OVEN
Step. 1
Firmly grasp both sides
of the door at the top.
Step. 2
With the door at the
same angle as the
removal position, seat
the indentation of the
hinge arm into the
bottom edge of the
hinge slot. The notch
in the hinge arm must
be fully seated into the
bottom of the slot.
Step. 3
Fully open the door. If the door will not fully open, the
indentation is not seated correctly in the bottom edge
of the slot.
ASSEMBLING THE BOTTOM DECORATIVE TRIM
2
a
Bottom decorative trim
• After installing the oven in the cabinet, assemble bottom decorative trim with 2 screws
Hinge arm
Bottom
edge of
slot
Indentation
Step. 4
Push the hinge locks up
against the front frame of the
oven cavity to the locked
position.
Step. 5
Close the oven door.
NOTE
When you install the oven
door, be careful not to bump
the bottom vent trim.
Keep oven vents
unobstructed. Replace the
bottom vent trim if it
becomes bent or deformed. Never block the vent with
plastic or heat-sensitive items.
- 17 -
Hinge arm
Hinge lock
Bottom
vent trim
(4X10).
b
Publicité
