Publicité
Les langues disponibles
Les langues disponibles
Part 1
SAFETY
IMPORTANT NOTE
This installation must be completed by a qualified installer or technician.
• Please read the entire Installation Instructions prior to installation.
• Remove all packing materials from the oven compartments before connecting the electrical supply to the oven.
• Installer: please retain these instructions for local inspector's reference, then leave them with the consumer.
• Consumer: please read and keep these instructions for future reference and be sure to read the entire
OWNER'S MANUAL prior to use.
• Do not use any parts except for provided components when you install the product.
WARNING
• The information in this manual
should be followed exactly.
− Failure to do so could result in fire or electrical
shock, causing property damage, personal
injury or death.
IMPORTANT NOTE
Proper installation is the responsibility of the installer,
and product failure due to improper installation is
NOT covered under warranty.
WARNING
• DO NOT put any weight on the
oven door. Never allow anyone to
climb, sit, stand or hang on the
oven door.
− The oven could tip and injury might result
from contact with hot food or the oven itself.
WARNING
• The electrical power must be shut
off while the electrical
connections are being made.
− Failure to do so can result in severe personal
injury, death or electrical shock.
REQUIRED TOOLS
Phillips Screwdriver
MATERIALS INCLUDED
6 Wood Screws for Mounting
6 Wood Screws for Mounting
Cover Brackets for Flush Installation
MATERIALS NEEDED
Junction Box
Wire Nuts
36" (91 cm)
of String
- 3 -
Drill
4X14
4X24
(for Flush Installation)
4X22
Self-Tapping Screws
for Cover Bracket
4X10 2 Screws
for bottom decorative trim
Bottom decorative trim
3/4" Conduit
Connector
Publicité
