Signature Kitchen Suite SKSSV3001S Guide D'installation page 11

Part 2 INSTALLATION REQUIREMENTS
Cutout Dimensions (Flush)
N
C
E
D
F
G
Cleat (Spacer)
• The provided cover brackets are only used for flush cabinet installations.
• Remove one screw from the left and right sides as shown. These screw holes will be used to mount the cover
brackets. Install the cover brackets on the sides of the oven with the provided self-tapping screws.
C
D Cleat (spacer) inset from front
E
M
G Depth of open door
H Bottom of cutout from floor
K
K
L
J
M Distance of conduit opening
N
I
H
Cover Bracket
4X22
Tapping Screw
- 11 -
- Dimensions
Cutout width
of cabinet
Cleat (spacer) width
F Cleat (spacer) depth
I Cutout depth
J Cleat (spacer) height
Cutout height
L Height of conduit opening from
floor of cutout
from side of cabinet
Bottom of bottom decorative
trim to vent opening
Combi Oven
30" (762 mm)
1 3/8" (34.8mm)
13/64" (5 mm)
1" (25.4 mm)
23" (584.2 mm)
12" (304.8 mm)
25" (635.0 mm)
44" (1118 mm)
43 13/16" (1113 mm)
39 7/8" (1012.8 mm)
5" (127mm)
3/4" (19 mm)