Publicité
Les langues disponibles
Les langues disponibles
7. Fish Wire Passenger Side: Attach items
n
instructions in Figure 2. Leave item
9. Driver Side Drill & Fish Wire & Hardware Attachment:
• Using the hitch as your guide drill a 1/2" hole (1) into the driver side frame.
• Attach items j and k to item n and follow the instructions in Figure 5.
• Carefully attach item l and m to item j
© 2023 Horizon Global™ Corp. - Printed in Mexico
j
k
n
and
to item
and follow the
attached until the hitch is raised into position.
8. Raise the Hitch into Position: (Fasteners Typical Both Sides) Be sure to feed the fish wire
through the hitch attachment point while raising the hitch into position.
• USA built models: Secure hitch to vehicle using supplied 10mm bolts, item
total) and 7/16" conical washers, item
n
wire (item
) and carefully attach item
• Korean built models: Secure hitch to vehicle using supplied 8mm bolts, item
total) and 3/8" conical washers, item
n
wire (item
) and carefully attach item
10. Torque Hardware:
• USA built models: Torque all 10mm bolts to 42 Lb-Ft (57N*M) and all 7/16"
fasteners to 50 Lb-Ft (68 N*M)
• Korean built models: Torque all 8mm bolts to 27 Lb-Ft (37N*M) and all 7/16"
fasteners to 50 Lb-Ft (68 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 8 of 27
25006NP
o
l
(teeth side toward hitch). Remove the fish
l
m
j
and
to item
.
p
q
(teeth side toward hitch). Remove the fish
l
m
j
and
to item
.
03-02-23
Rev. A
(4
(4
Publicité
