Horizon Global 25006 Instructions D'utilisation page 6

3B. Remove the Fascia: (Driver Side) Remove 1 push pin (1 total) on the bottom of the
fascia by the wheel well.
3D. Remove the Fascia: Start in the wheel wells and gently pull on the fascia to unclip it
from the mounting tabs. Using the plastic trim tools and tape in the area of tool use (to
prevent scratching) may help in the removal of the fascia. Place the fascia in a safe location
to reinstall later.
© 2023 Horizon Global™ Corp. - Printed in Mexico
3C. Remove the Fascia: (Passenger Side) Remove 2 push pin (2 total) on the bottom of the
fascia by the wheel well.
4. Lower Exhaust: Ensure the exhaust is supported prior to lowering. Using an exhaust
hanger removal tool remove the rubber isolators from the hangers to lower the exhaust.
Sheet 6 of 27 25006NP 03-02-23 Rev. A