Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Website: www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions for
your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted to your
vehicle periodically.
ALWAYS read, understand and follow all warnings and instructions for
your vehicle and for other accessories you will use with your hitch
BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
2000 lb. (907 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold the
steering wheel as steady as possible. DO NOT apply your brakes and DO
NOT speed up.
©2021 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 25003, 78296, CQT25003
Max Tongue
Weight
Weight
200 lb. (90.7 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in Stelvioance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 18
25003NP
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
10-18-21
Rev. A

Publicité

Table des Matières
loading

Sommaire des Matières pour Horizon Global 25003

  • Page 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear •...
  • Page 2: Applications

    MANUFACTURER’S RATING OR: Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 2000 lb. (907 kg) 200 lb. (90.7 kg) Weight Distributing Hitch Illustration ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 18 25003NP 10-18-21 Rev. A...
  • Page 3 This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 18...
  • Page 4 Rivets Screws 2. Remove heat shield – Using 10 mm socket remove (4) bolts from each heat shield, per side. Remove heat shields. Screw ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 18 25003NP 10-18-21 Rev. A...
  • Page 5 Raise the hitch into position and feed the pull wires through bracket holes. Remove pull wires and loosely install conical washers ③ and hex nuts ④ to the hitch. Access holes Drilled holes Frame rails Enlarged holes ② ① ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 18 25003NP 10-18-21 Rev. A...
  • Page 6 Proper torque is needed to keep the hitch secure to the vehicle when towing. 6. Tighten all 7/16”-14x1.50 Gr5 fasteners with torque wrench to 50 ft.lb. (68 N*m). 7. Reinstall heat shields and exhaust mufflers. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 18 25003NP 10-18-21 Rev.
  • Page 7: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de matières et de fabrication, exception faite de l’usure normale. Cette garantie n'est valide que si Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES...
  • Page 8: Illustration De L'attelage

    Numériser pour des Instructions d’installation instructions avec PHOTOS ou visiter Site Internet: www.horizonglobal.com http://qr.towingprod NUMÉROS DE PIÈCES : 25003, 78296, CQT25003 ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 60 min Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Page 9 Instructions d’installation Visserie : 25003F Portez toujours des LUNETTES DE PROTECTION pour installer l'attelage NUMÉROS DE PIÈCE : 25003, 78296, CQT25003 ① Qté (4) Boulon de carrosserie 7/16”-14 x 1.50” ② Qté (4) Espaceur .188” x 1” x 2” Trous d’accès Visserie ③...
  • Page 10 2. Retirer l’écran thermique – À l’aide d’une douille 10 mm, retirer quatre (4) boulons de chaque écran thermique, de chaque côté. Retirer les écrans thermiques. Screw ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 10 de 18 25003NP 10-18-21 Rev.
  • Page 11 Retirer les fils de tirage et installer lâchement des rondelles coniques ③ et des écrous hexagonaux ④ sur l'attelage. Access holes Drilled holes Frame rails Enlarged holes ② ① ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 11 de 18 25003NP 10-18-21 Rev. A...
  • Page 12 Proper torque is needed to keep the hitch secure to the vehicle when towing. 6. Serrer toute la visserie 7/16”-14 x 1.50 Gr5 au couple de 50 pi-lb (68 N m). 7. Réinstaller les écrans thermiques et les silencieux d’échappement. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 12 de 18 25003NP 10-18-21 Rev.
  • Page 13: Garantía Limitada De Por Vida

    GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Page 14: Equipo Necesario

    Escanear para instrucciones Instrucciones de instalación de la instalación paso por paso con FOTO, o visitar Sitio web: www.horizonglobal.com NÚMEROS DE PARTES: 25003, 78296, CQT25003 http://qr.towingproducts. Assistance técnica: 800-632-3290 net/qrproducts/qr- TechnicalSupport@horizonglobal.com product Aplicaciones: Tiempo de instalación: 60 min Años Marca...
  • Page 15 No corte los orificios de acceso o accesorios con soplete. Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2020 Horizon Global™ Corp - Impreso en México Hoja 15 de 18...
  • Page 16 2. Quitar el protector de calor: Con un cubo de 10 mm, quitar (4) pernos que sujetan el protector de calor, por lado. Quitar los protectores de calor. Screw ©2021 Horizon Global™ Corp. Impreso en México Hoja 16 de 18...
  • Page 17 Quitar los cables de insertar y sin apretar instalar arandelas cónicas ③ y tuercas hexagonales ④ en el enganche. Access holes Drilled holes Frame rails Enlarged holes ② ① ©2021 Horizon Global™ Corp. Impreso en México Hoja 17 de 18 25003NP 10-18-21 Rev. A...
  • Page 18 6. Apretar todos los fijadores 7/16"-14x1.50 GR5 con una llave de torque a 50 Lb.-pies Proper torque is needed to keep the hitch secure to the vehicle when towing. (68 N*m). 7. Reinstalar los protectores de calor y silenciadores de escape. ©2021 Horizon Global™ Corp. Impreso en México Hoja 18 de 18 25003NP 10-18-21...

Ce manuel est également adapté pour:

78296Cqt25003

Table des Matières