Télécharger Imprimer la page

Horizon Global 25006 Instructions D'utilisation page 7

Publicité

Les langues disponibles

Les langues disponibles

5A. Trim: Fascia: (Use figure 3 as a guide) From the centerline of the fascia measure and mark a section 2.5" (2 ½") each direction and 3.75" (3 ¾") from the bottom forward edge of the
fascia. Trim off the section that is marked.
5B. Trim: Center Under Body Panel: (Use figure 3 as a guide) From the centerline of the fascia measure and mark a section 2.5" (2 ½") each direction and 1" from the bottom rearward
edge of the fascia. Trim off the section that is marked.
Rear Fascia (Bottom)
Center of
5"
Vehicle
3.75"
1"
Center Bottom Panel
Figure 3
5C. Trim: Driver Side Under Body Panel: (Refer to figure 4) Trim off the forward most
6. Reinstall Fascia, Taillights : Reversing steps 2 to 3 raise and secure the fascia into place.
frame attachment as needed.
Figure 4
Bottom Driver
side Panel.
Trim as needed
© 2023 Horizon Global™ Corp. - Printed in Mexico
Sheet 7 of 27
25006NP
03-02-23
Rev. A

Publicité

loading

Ce manuel est également adapté pour:

78299Cqt25006