Publicité
Les langues disponibles
Les langues disponibles
Heat meter connection set
Safety-related information
2.3
Safety notes
We have developed this product in accordance
with current safety requirements.
Please observe the following notes concerning
safe use.
2.3.1
Danger due to insufficient personnel
qualification
Work on this product may only be carried out
by suitably qualified specialist tradespeople.
Due to their professional training and
experience as well as knowledge of the
relevant legal regulations, qualified specialist
tradespeople are able to carry out work on the
described product in a professional manner.
Operator
The operator must be instructed in the
operation by specialist tradespeople.
2.3.2
Risk of burns due to an inadvertent
discharge of hot media
!
Only carry out work when the system is
depressurised.
!
Allow the product to cool down before
working on it.
!
Check that the product is not leaking after
work is complete.
!
Wear safety goggles.
2.3.3
Risk of burns due to hot components
and surfaces
!
Allow the product to cool down before
working on it.
!
Wear suitable protective clothing to avoid
unprotected contact with hot system
components and fittings.
2.3.4
Risk of injury in case of improper
work
Stored energies, angular components,
protrusions and edges may cause injuries.
!
Before starting work, make sure that there
is enough space.
140488480-V01.10.2021
!
Handle open and hard-edged components
with care.
!
Make sure that the workplace is tidy and
clean to avoid accidents.
2.3.5
Damage to property due to an
unsuitable installation location
!
Do not install the product in rooms prone
to frost.
2.3.6
Availability of the operating
instructions
Every person working with this product must
have read and apply these instructions and all
other applicable instructions.
The instructions must be available at the place
of use of the product.
!
Pass on these instructions and all
applicable instructions to the operator.
EN
19
Publicité
