Operating The Md Deck Using A Keyboard; Setting The Keyboard - Sony MDS-JB980 Mode D'emploi

Operating the MD Deck Using a Keyboard

Setting the keyboard

You can use any IBM
with a PS/2 interface. You can select a keyboard
with either an English or Japanese keyboard
layout. When you use a keyboard with a
different layout, you need to assign characters
to the keys. For details, see "Assigning
characters to keyboard keys" on page 44.
1) IBM is the registered trademark of International
Business Machines Corporation.
2) Power consumption must be 120 mA or less.
Connecting a keyboard to the
MD deck
Connect the keyboard connector to the
KEYBOARD jack on the front panel of the
deck.
You can connect or disconnect the keyboard at
any time regardless of whether the deck is
turned on or off.
42
GB
1)
-compatible keyboard
Selecting keyboard type
The first time you connect a keyboard, you need
to select the keyboard type.
1
While the deck is stopped, press MENU/
2)
NO.
2
Turn AMS (or press ./>
repeatedly) until "Setup?" appears,
then press AMS or YES.
3
Turn AMS (or press ./>
repeatedly) until "Keyboard?" appears,
then press AMS or YES.
4
Turn AMS (or press ./>
repeatedly) until "Type" appears, then
press AMS or YES.
5
Turn AMS (or press ./>
repeatedly) to select the setting, then
press AMS or YES.
To use the keyboard with
English keyboard layout
Japanese keyboard layout
1) You can also recall the factory setting by
pressing CLEAR.
6
Press MENU/NO.
Select
US (factory
1)
setting )
JP