Recording Tracks Using The Group Function (Group Mode Recording) - Sony Walkman MZ-S1 Mode D'emploi

4
Press . or > repeatedly until
"OFF" flashes in the display, and then
press ENTER.
If you want "LP:" added, select "ON"
in this step, and then press ENTER.
Note
"LP:" is added to tracks checked-out in LP
stereo from your computer regardless of the
"LP Stamp" setting. If you want to delete
"LP:", do the procedure "Relabeling
recordings" (page 41)
z
• Audio components that support the LP2 stereo
or LP4 stereo modes are indicated by the
or logo marks.
• If you set the recorder so that "LP:" is not
added at the beginning of the track, you will
be able to enter longer track names by using
the full length of the text string "Relabeling
recordings" (page 41).
• You can achieve high sound quality and rich
tones when recording in SP stereo (or
monaural) thanks to the newly developed DSP
TYPE-R for ATRAC (Adaptive TRansform
Acoustic Coding) (page 20).
Notes
• It is recommended that you use the AC power
adaptor for long recordings.
• During monaural recording of a stereo sound
source connected through the digital (optical)
input jack, you can still monitor the recorded
sound in stereo by using headphones or
earphones connected to the i jack.
• Sound recorded through digital (optical) input
can be monitored in stereo through
headphones/earphones, etc.
• When you record in LP4 mode, momentary
noise may be produced on very rare occasions
with certain sound sources. This is because of
the special digital audio compression
technology that enables a recording time of 4
times longer than normal. If noise is produced,
it is recommended that you record in normal
stereo or LP2 mode to obtain better sound
quality.
Recording tracks using
the group function
(Group Mode Recording)
What is the group function
(Group Mode)?
It is a function that allows you to separate
tracks on a disc into different groups for
playback, recording and editing.
When group mode is OFF.
Disc
Track number
1 2 3 4 5 6 7 8 9
When group mode is ON.
Disc
Group 1 Group 2
Track Track
number number
1 2 3 1 2
It is convenient for managing multiple CD
albums recorded in MDLP (LP2 stereo/
LP4 stereo) mode onto a single MD. You
can create a maximum of 99 groups on a
disc.
Group 3
Track
number
1 2 3 4
29
-GB