Getting Started; Hooking Up The Audio Components - Sony MDS-JB980 Mode D'emploi

Getting Started

Hooking up the audio components

A
Amplifier, etc.
1) Digital equipment with a DIGITAL OUT connector only
2) Digital equipment with both DIGITAL IN and OUT connectors
Required cords
A Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to
match the colour-coded pins to the appropriate jacks:
white (left) to white and red (right) to red.
White (L)
Red (R)
B Optical cables (2) (only one supplied)
• When connecting an optical cable, insert the cable
plugs straight in until they click into place.
• Do not bend or tie the optical cables.
6
GB
C
CD player, DBS CD player, DBS tuner, etc.
tuner Digital amplifier, DAT deck,
MD deck, etc.
White (L)
Red (R)
B
1)
,
2)
C Coaxial digital connecting cable (1)
(not supplied)
Hookup considerations
• Turn off the power of all components before
making any connections.
• Do not connect any mains lead until all the
connections are completed.
• Be sure the connections are firm to prevent hum
and noise.
mains lead
to mains