Display Messages - Sony MDS-JB980 Mode D'emploi

C14/TOC Error
• The deck could not read the TOC on the MD
properly.
, Insert another disc.
, If possible, erase all the tracks on the MD
(page 26).
C41/Cannot Copy
• The sound source is a copy of commercially
available music software, or you tried to record a
CD-R (Recordable CD).
, The Serial Copy Management System
prevents making a digital copy (page 47). You
cannot record a CD-R.
C71/Din Unlock
• The sporadic appearance of this message is
caused by the digital signal being recorded. This
will not affect the recording.
• While recording from a digital component, the
digital connecting cable may have been
incompletely connected and come loose or the
digital component was turned off.
, Check the connection or turn the digital
component back on.
E0001/MEMORY NG
• There is an error in the internal data that the deck
needs in order to operate.
, Consult your nearest Sony dealer.
E0101/LASER NG
• There is a problem with the optical pickup.
, The optical pickup may have failed. Consult
your nearest Sony dealer.
E0201/LOADING NG
• There is a problem with the loading.
, The loading may have failed. Consult your
nearest Sony dealer.

Display messages

The following table explains the various
messages that appear in the display. Messages
are also displayed by the deck's Self-diagnosis
function (see "Self-diagnosis function" on page
48).
Auto Cut
The Auto Cut Function is on (page 14).
Blank Disc
A new (blank) or erased MD has been inserted.
Busy NOW!
You pressed NET MD during Check In or Check
Out. Wait until the operation is completed.
Cannot Edit
An attempt was made to edit the MD during
Programme or Shuffle Play or to change the
recording level of an MD recorded in LP2 or LP4
Stereo mode.
Check USB
The USB cable is not connected properly. Check
the connection.
CONNECT
Check In or Check Out is underway. (If you attempt
an invalid operation at this time, "CONNECT!"
appears.)
Disc Full!
The MD is full (page 46).
Group Full!
An attempt was made to create a new group in
excess of the maximum number of groups, or there
are insufficient characters for updating the group
management information.
Impossible
The deck cannot do the recording or editing
operation (page 27 and page 29).
continued
49
GB