Tips For Recording From Mds To Tape - Sony MDS-JB980 Mode D'emploi

Tips for recording from
MDs to tape
Inserting blanks between
tracks during play (Auto
Space)
The MD deck can be set to automatically insert
a three-second blank between tracks during
play. This function is useful when you are
recording from an MD to an analogue tape. The
three-second blank enables you to use the
Multi-AMS function later to locate the
beginning of tracks on the tape.
1
While the deck is stopped, press MENU/
NO.
2
Turn AMS (or press ./>
repeatedly) until "Setup?" appears,
then press AMS or YES.
3
Turn AMS (or press ./>
repeatedly) until "Auto Off" appears,
then press AMS or YES.
4
Turn AMS (or press ./>
repeatedly) to select the setting, then
press AMS or YES.
To
Turn on Auto Space
Turn off Auto Space
5
Press MENU/NO.
Tip
When you turn on Auto Space, "Auto Space" appears
when the deck is inserting a blank between tracks.
Note
If you select "Auto Space" and record a selection
containing multiple track numbers (for example, a
medley or symphony), blank spaces will be created on
the tape between the various sections.
24
GB
Select
Auto Space
Auto Off (factory
setting)
Pausing after each track
(Auto Pause)
You can set the MD deck so that it pauses after
each track to give you time to locate the next
track to be recorded.
1
While the deck is stopped, press MENU/
NO.
2
Turn AMS (or press ./>
repeatedly) until "Setup?" appears,
then press AMS or YES.
3
Turn AMS (or press ./>
repeatedly) until "Auto Off" appears,
then press AMS or YES.
4
Turn AMS (or press ./>
repeatedly) to select the setting, then
press AMS or YES.
To
Turn on Auto Pause
Turn off Auto Pause
5
Press MENU/NO.
To resume play after pausing
Press H.
Tip
When you turn on Auto Pause, "Auto Pause" appears
during pause and disappears when the deck resumes
play.
Select
Auto Pause
Auto Off (factory
setting)