Connecting A Personal Computer To The Deck (Net Md) - Sony MDS-JB980 Mode D'emploi

Jacks (connectors) for
connecting audio
components
Connect
Amplifiers
CD players or DBS
tuners
Digital amplifiers, DAT
decks, or another MD
deck
To connect the mains lead
Connect the mains lead of the deck to mains.
Note
If you use a timer, connect the mains lead to the socket
of the timer.
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries into the
battery compartment with the + and – properly
oriented to the markings. When using the
remote, point it at the remote sensor
deck.
Tip
When the remote no longer operates the deck, replace
both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatus. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
To the
ANALOG IN/OUT jacks
DIGITAL COAXIAL IN
jack or DIGITAL
OPTICAL IN connector
DIGITAL OPTICAL IN/
OUT connectors
on the
Connecting a personal
computer to the deck
(Net MD)
By installing the supplied software OpenMG
Jukebox onto your computer, you can transfer
digital music contents saved on the hard disc of
your computer to (Check Out) and from (Check
In) an MD. For details on the installation and
operation of OpenMG Jukebox, refer to the
instruction manual or the online help for
OpenMG Jukebox.
Be sure to install the OpenMG Jukebox
software to your computer before you
connect the MD deck and your
computer.
Computer
continued
7
GB