Steinbach Poolrunner Battery Pro Performance Notice Originale page 26

Stopping cleaning
The device stops cleaning automatically as soon as the rechargeable battery is almost discharged. The
status indicator blinks yellow while the device moves to the pool wall and stays yellow as soon as it
5
has reached its end position.
Lifting the device out of the pool
1. Attach the hook
thread it into the handle of the device.
2. Slowly pull the device towards the water
surface until you can reach the handle.
3. Slowly lift the device out of the water and hold
it above the water surface.
After 10 to 15 seconds, most of the water that
has collected in the housing has drained back
into the pool.
4. Switch off the ON/OFF switch
The status indicator
soon as the device has switched itself off.
5. Set down the device next to the pool.
The device is lifted out of the pool.
Clean the device after each use to ensure continued trouble-free operation.
Cleaning
Only clean the device with a standard bathroom cleaner, clear tap water and a lint-free cloth. Aggressive
cleaning agents can damage the device. Dry the device with a lint-free cloth.
26
to a telescopic rod and
2
.
6
is lit red and goes off as
5
8