Steinbach Poolrunner Battery Pro Performance Notice Originale page 24

Do not start up a damaged device or damaged accessories. Have them checked by the manufacturer or
its customer service or a qualified service technician.
Cleaning the pool
Observe the following before cleaning your pool:
- Remove any cover or foil from the pool.
- Remove obstacles (such as a ladder) from the pool.
- Switch off the filter system at least one hour before the start of cleaning so that particles in the
water can settle on the floor.
Proceed as follows to clean your pool:
1. Insert the filter unit.
2. Place the device in the pool and switch it on.
Inserting the filter
3
9
1. Open the hatch
2. Position the filter unit
channel.
3. Close the hatch
The filter is inserted.
Placing the device in the pool and starting cleaning
You can use the device as delivered without using the app. Optionally, you can also optimize the preset
cleaning program to suit your individual requirements (see section "Description"). The desired settings
must be made before operation and outside the water; they are saved and can be used afterwards.
24
.
9
on the suction
8
so that it locks in place.
9
4
5
9
8